Transfer Seal Alphabet Capitals

Place your design on the surface you wish to apply to.
Rub the transfer gently but firmly.
Slowly lift the design from one corner to make sure you got the entire design.

With the UV soft resin “Drips of the Sun”, you can easily make resin parts. Just pour a little resin on the transfer decal and cure it for 2 minutes under UV light. Slowly lift it from the sheet and now you have a resin accessory ready to use in your own artworks.

How to use:

Place design on chosen object
1. Pour color resin in setting and cure with UV light. Put clear resin slightly onto it.	2. Cut a decal in proper size and place onto the resin.
3. Peel off the film slowly.	4. Pour plenty of resin until swelling and cure it again.

Enclose the object
Fill half of the mold with resin and cure it under UV-light. Add a little more resin, place the decal facing downwards and cure it.	Pour resin until mold is fully covered and cure again.	Cover with colour resin and cure it a last time.

Make resin accessories
Choose your design and pour resin on the backside of the decal.	Cure under UV light and you have a resin accessory.